Fiber-To-The-Home (FTTH) Architecture for Mosul, Iraq

Authors

  • A.S. Shibghatullah
  • M.M. Mohammed
  • M. Doheir
  • A.N. Majed

Abstract

Fiber-To-The-Home (FTTH) is the most promising technology that can offer high bandwidth with more reliability and very high Quality of Service (QoS) comparing with the previous kind of traditional internet connection technologies such as DSL. This technology is based on the optical technology, which use fiber optics that connect the internet service to end-user, which is the subscriber. This work is done to investigate factors and challenges of deploying FTTH technology or a suitable architecture in Iraq. There will be challenges and issues that could be faced while implementing a certain type of FTTH architecture. This research investigated the best solution to provide an internet access to the end-user in Iraq that support higher capacity adaptability due to the increasing number of higher bandwidth access request. Firstly, current studies and works was done in order to explore knowledge about FTTH. Next, factors affecting successful deployment was identified through survey among users in Mosul (one of the main cities in Iraq) in order to generate factors by performing the analysis part based on the collected data to help proposing and choosing the suitable FTTH architecture in the end. The results of this research will be helpful for the government and companies that provide the internet access to the end-users in Iraq to deploy the technology successfully.

Downloads

Download data is not yet available.

References

Ab-Rahman, M.,. “Analysis of Current Demand Features of Fiber-to-the Home/Desk (FTTH/D) Network in Malaysia,” Journal of Applied Sciences Research, 7(5), pp.572–577, 2011.

TJ Abaas, AS Shibghatullah, MM Jaber, “Use Information Sharing Environment Concept to Design Electronic Intelligence Framework for Support E-Government: Iraq as Case Study,” Advances in Computing 4 (1), 22-24, 2014.

Zuraida Abal Abas, “Extended advancing front technique for the initial triangular mesh construction on a single coil for radiative heat transfer”, Arabian Journal for Science and Engineering, 1-18, 2013.

Chen, J. et al., “Cost vs. reliability performance study of fiber access network architectures”, IEEE Communications Magazine, 48(2), pp.56– 65, 2010.

NF Mansor, Z Abal Abas, A Rahman, AF Nizam, AS Shibghatullah, “An analysis of the parameter modifications in varieties of harmony search algorithm”. International Review on Computers and Software (IRECOS), 9 (10), 1736-1749, 2014.

Chiou, R.N., “Deploying FTTH with distributed control and bus topology”, In 16th International Conference on Advanced Communication Technology, Global IT Research Institute (GIRI), pp. 1178–1183, 2014.

TJ Abaas, AS Shibghatullah, MM Jaber, “Use Information Sharing Environment Concept to Design Electronic Intelligence Framework for Support E-Government Iraq as Case Study”, Advances in Computing, 4 (1), 22-24, 2014.

Dixit, A. et al., “Evaluation of ONU Power Saving Modes in Next Generation Optical Access Networks”, In European Conference and Exhibition on Optical Communication, Washington, D.C.: OSA, p. Mo.2.B.5, 2012.

Forzati, M. et al., “The uncaptured value of FTTH networks”, In 2011 13th International Conference on Transparent Optical Networks, IEEE, pp. 1–4, 2011.

Greenstein, S. & McDevitt, R., “The broadband bonus: Estimating broadband Internet’s economic value”, Telecommunications Policy, (April), p.61, 2011.

Mitschke, F., Fiber Optics: Physics and Technology First, Berlin: Springer, 2010.

Rigby, P., FTTH Handbook, 6th ed. E. C. Bull & C. C. AB, eds., D&O Committee, 2011.

Rokkas, T., Katsianis, D. & Varoutas, D., “Technoeconomic Evaluation of FTTC/VDSL and FTTH Roll-Out Scenarios: Discounted Cash Flows and Real Option Valuation”, Journal of Optical Communications and Networking, 2(9), p.760, 2010.

Downloads

Published

2017-10-31

How to Cite

Shibghatullah, A., Mohammed, M., Doheir, M., & Majed, A. (2017). Fiber-To-The-Home (FTTH) Architecture for Mosul, Iraq. International Journal of Human and Technology Interaction (IJHaTI), 1(1 October), 37–42. Retrieved from https://ijhati.utem.edu.my/ijhati/article/view/2842

Issue

Vol. 1 No. 1 October (2017)

Section

Technology in Management

License

The articles may be used for research, teaching, and private study purposes. Any substantial or systematic reproduction, redistribution, reselling, loan, sub-licensing, systematic supply, or distribution in any form to anyone is expressly forbidden. Authors alone are responsible for the contents of their articles. The journal owns the copyright of the articles. However, within the framework of Creative Commons (CC) copyright license, authors can use their published works in non-profit environments and share them on their own platforms on the internet. The publisher shall not be liable for any loss, actions, claims, proceedings, demand, or costs or damages whatsoever or howsoever caused arising directly or indirectly in connection with or arising out of the use of the research material. All authors are requested to disclose any actual or potential conflict of interest including any financial, personal or other relationships with other people or organizations regarding the submitted work.

The author (s) guarantees that the submitted article is his/her/their original research. All authors participating in this study assumed public responsibility and confirmed that the article was not submitted for another journal. All the articles in the article do not violate the existing copyright rules and intellectual property rights of any person or organization. The article meets the ethical standards applicable to the research discipline.

The authors cannot withdraw the article they have uploaded to IJHaTI journal and upload it to another journal without the approval of the journal editor.

Authors are responsible for obtaining written permission to include any images or artwork for which they do not hold copyright in their articles, or to adapt any such images or artwork for inclusion in their articles. The copyright